How to Measure your Jacket Size

Why is it important

Properly measuring yourself can ensure you get that perfect, solid fit expected from W&H.

How to and what you will need

You will need either:

- a measuring tape

- or a piece of string and a ruler

How to:

1) Keep your arms down by your side and wrap the measuring tape or piece of string beneath your arms around the fullest part of your chest.

2) Mark the spot where the two ends meet around your chest (ensure it is firmly wrapped around)

If you are using a measuring tape, note down the measurement in inches.

If you are using a string, straighten out the string that was wrapped around your chest and measure using the ruler.

If your measurement is in CM, you will have to convert it to inches (divide by 2.54).

Looking for a traditional waxed jacket without the extra padded weight? Our Benson Jacket is exactly that.

Perfect for the active outdoorsman who wants to keep as lightweight as possible whilst keeping the rugged and weatherproof qualities of wax garments.

Authentically made in Britain using 100% quality waxed cotton, it comes without the padding to keep you lightweight and dry. We have been manufacturing this garment for over 20 years, so have perfected the manufacturing process to ensure practicality, durability and quality is maintained with every jacket.

Waxed cotton has been around since the 15th century as a way for Scottish fishermen to waterproof their sails without affecting its efficiency. Back then, they used fish oils - different to the superior paraffin or natural beeswax-based wax we use today. Leftover pieces of cloth were used as capes to keep the fishermen dry. This evidently worked well as waxed cotton is now a very popular fabric for jackets and was even adopted by British forces for World War 2!

We have strived to uphold the essence of what made a wax jacket so famous.

Our well-lined Benson Wax Jacket will protect you during the winter with its tightly stitched seams to keep water and wind out. The waxed cotton exterior further protects the coat from water. Along with the elasticated cuffs, 2 hand-warmer pockets and a detachable hood, you have extra shielding from harsh winds and rain.

One of the reasons why waxed jackets can last a lifetime is you can restore your jacket using our Waxed Cotton Dressing. Improving its longevity and waterproof capabilities - you’ll not need another jacket for a long time!

Our Benson Wax Jacket has a roomy fit so that you can fit extra layers on the inside whilst ensuring freedom of movement during your activities. Available in Olive, Navy, Brown, Black, and Beige. We recommend styling this jacket with our selection of matching wax gilets and hats.

Accurately measure yourself and refer to our size guide in product images before purchasing to receive the great fit you expect from a Walker and Hawkes product.

Taking Care of Your Waxed Garments

Reproofing your garments is easier than you think and will restore them to just about a newly bought condition.

1. Cleaning Accumulated Dirt, Debris, or Residues

• Collect needed cleaning items: cold water and a sponge or soft cloth.
• Bring the garment to room temperature if stored in a colder area.
• Find a sturdy work surface (such as a table) and place a plastic sheet or table cloth over it for protection.
• Lay the jacket or trousers flat on the work surface. If it's a hat, just place it upright on the surface.
• Dip the sponge or cloth in cold water, squeeze out excess, and gently wipe down the garment.
• Go over the entire surface area to give a quick rinse, removing any dirt, debris, or residues trapped in the fabric. Particularly pay attention to get into any seams, creases, and areas of most wear and tear.

2. Applying Fresh Wax to Reproof

• Prepare wax that comes in a tin container, by placing the tin in a bowl or basin of water. Water needs to be hot enough to melt and soften into a smooth wax.
• Use a clean, sturdy work surface, covered with any needed protective plastic or tablecloth, and preferably in a well-ventilated area.
• Place the cleaned jacket or trousers flat and spread out on the work surface.
• Dip the sponge or soft cloth in the melted wax and work an even layer over the garment surface to provide a coat. Pay close attention to any seams and creases, worn-out areas, or areas that are drier.
• Make sure to cover the entire jacket or trousers and be careful not to apply wax over regular cloth surfaces, including the insides of pockets, any lining material, or corduroy used for collars, elbows, knees, and cuffs.
• Hang your garment in a warm place to dry thoroughly overnight.
• Extra tips: 1) Do not use the treated garment immediately to avoid spreading moist wax onto contact surfaces. 2) Use a hair-dryer in a low-heat setting and run over the newly waxed or reproofed garment to help speed up the drying process and settle the wax into an even coverage.

Key Features

• Outer shell made from 100% waxed cotton.
• Internal lining is 100% cotton.
• Classic tartan check lining.
• Knitted inner storm cuffs.
• 2 hand-warmer pockets.
• 2 front bellow pockets.
• 2-way heavy duty zip with studded storm flap.
• Colour corduroy collar which is studded for optional hood (included).
• 1 large inside map pocket.
• W&H branded studs.

Looks Great With Our Other Waxed Cotton Products!

Derby Tweed Hoaden Baseball Cap

Wax Belmont Aussie Outback Hat

Men's Wax Winchester Gilet

Wax Belton Flat Cap